CENTRIFUGAL FAN Type : V SOD Explosive atmospheres - Industrial ventilation Centrifugal single inlet fan fitted with a forward curved and setted blades wheel type TUE, direct driven. The casing is welded by points, out of galvanized steel, stainless steel or aluminium. Version VSOD-EX for ATEX. Diameter of wheel / impeller : 96 to 500mm Flow : 0 to 13000m3/h Pressure : de 0 à 150mmWG Temperature : 80°C maximum in standard version, 100°C with high temperature seal
CENTRIFUGAL FAN Type : V SOD HT Smokes and hot gas exhausters - Industrial ventilation Centrifugal single inlet fan fitted with a forward curved and setted blades wheel type TUE, direct driven. The casing is welded by points, out of galvanized steel, stainless steel or aluminium.
Manufactured with insulated device on motor shaft (cooling wheel) Diameter of wheel / impeller : 96 to 500mm Flow : 0 to 13000m3/h Pressure : de 0 à 150mmWG Temperature : 250°C maximum in standard version. Others on request
CENTRIFUGAL FAN Type : V SOD Et Industrial ventilation Centrifugal tight single inlet fan fitted with a forward curved and setted blades wheel type TUE, direct driven. The casing is continuously welded or tightness with a supple seal, out of galvanized steel, stainless steel or aluminium.
Diameter of wheel / impeller : 96 to 500mm Flow : 0 to 13000m3/h Pressure : de 0 à 150mmWG Temperature : 100°C maximum in standard version. Others on request
CENTRIFUGAL FAN Type : V SOD OUTLET AT 90° Smokes and hot gas exhausters - Industrial ventilation Centrifugal single inlet fan, cubic or spiral with outlet at 90° for vertical extraction. Flange on inlet for fan fixation.
Fitted with a forward curved and setted blades wheel type TUE, direct driven.
The casing is welded by points, out of galvanized steel, stainless steel or aluminium Diameter of wheel / impeller : 120 to 400mm Flow : 0 to 10000m3/h Pressure : de 0 à 120mmWG Temperature : 80°C maximum in standard version, 100°C with high temperature seal.
250°C in high temperature, Others on request.
CENTRIFUGAL FAN Type : V SOD BASE and V SOD HT BASE Smokes and hot gas exhausters - Industrial ventilation Centrifugal single inlet fan, cubic with added base for fixation on inlet side. Fitted with a forward curved and setted blades wheel type TUE, direct driven.
The casing is welded by points, out of galvanized steel, stainless steel or aluminium.
Manufactured with insulated device on motor shaft (cooling wheel) Diameter of wheel / impeller : 210 to 500mm Flow : 1000 to 13000m3/h Pressure : de 0 à 150mmWG Temperature : 80°C maximum in standard version, 100°C with high temperature seal.
250°C in high temperature, Others on request.
CENTRIFUGAL FAN Type : V SOC Industrial ventilation - Tertiary ventilation Centrifugal single inlet fan fitted with a forward curved and setted blades wheel type TUE, belt driven (a bearing out of the airflow). The casing is welded by points, out of galvanized steel, stainless steel or aluminium Diameter of wheel / impeller : 190 to 500mm Flow : 0 to 13000m3/h Pressure : de 0 à 150mmWG Temperature : 40°C maximum in standard version, 100°C with high temperature seal.
CENTRIFUGAL FAN Type: V SOC VAC and V SOC VAC HT Smokes and hot gas exhausters - Industrial ventilation Centrifugal single inlet fan fitted with a forward curved and setted blades wheel type TUE, belt driven, bearings outside airflow mounted on pedestal, motor on stool or base frame. The casing is welded by points, out of galvanized steel, stainless steel or aluminium. Diameter of wheel / impeller : 190 to 500mm Flow : 0 to 13000m3/h Pressure : de 0 à 150mmWG Temperature : 800°C Maximum
CENTRIFUGAL FAN Type : V DOD Industrial ventilation Centrifugal double inlet fan fitted with a forward curved and setted blades wheel type TUE, direct driven, motor out of the airflow, casing is welded by points, out of galvanized steel, stainless steel or aluminium. Diameter of wheel / impeller : 210 to 325mm Flow : 1000 to 5000m3/h Pressure : de 0 à 100mmWG Temperature : 40°C maximum, Others on request.
CENTRIFUGAL FAN Type : V DOC Industrial ventilation - Tertiary ventilation Centrifugal double inlet fan fitted with a forward curved and setted blades wheel type TUE, belt driven (a bearing out of the airflow). The casing is welded by points, out of galvanized steel, stainless steel or aluminium. Simplex, duplex, triplex version… Diameter of wheel / impeller : 190 to 500mm Flow : 0 to 30000m3/h Pressure : de 0 à 100mmWG Temperature : 40°C maximum, Others on request.
CENTRIFUGAL FAN Type : VP SOD Explosive atmospheres - Industrial ventilation Centrifugal single inlet fan fitted with a high efficiency wheel, with forward curved and setted blades type TURA, and a direct driven motor. The casing is welded by points, out of galvanized steel, stainless steel or aluminium. Version VPSOD-EX for ATEX. Diameter of wheel / impeller : 180 to 500mm Flow : 0 to 20000m3/h Pressure : de 0 à 200mmWG Temperature : 80°C maximum in standard range, 100°C with a high temperature seal.
CENTRIFUGAL FAN Type : VP SOD HT Smokes and hot gas exhausters - Industrial ventilation Centrifugal single inlet fan fitted with an high efficiency wheel, with forward curved and setted blades type TURA, and a direct driven motor. The casing is welded by points, out of galvanized steel, stainless steel or aluminium.
Manufactured with an insulated device on motor shaft (cooling wheel) Diameter of wheel / impeller : 180 to 500mm Flow : 0 to 20000m3/h Pressure : de 0 à 200mmWG Temperature : 250°C maximum in standard version, Others on request.
CENTRIFUGAL FAN Type : VP SOD Et Industrial ventilation Centrifugal tight single inlet fan fitted with an high efficiency wheel, with forward curved and setted blades type TURA, and a direct driven motor. The casing is continuously welded or tightness with a supple seal, out of galvanized steel, stainless steel or aluminium.
Manufactured with an insulated device on motor shaft (cooling wheel) Diameter of wheel / impeller : 180 to 500mm Flow : 0 to 20000m3/h Pressure : de 0 à 200mmWG Temperature : 100°C maximum in standard version, Others on request.
CENTRIFUGAL FAN Type: VP SOD BASE and VP SOD HT BASE Smokes and hot gas exhausters - Industrial ventilation Centrifugal single inlet fan, cubic with added base for fixation on inlet side.
Fitted with an high efficiency wheel, with forward curved and setted blades type TURA, and a direct driven motor.
The casing is welded by points, out of galvanized steel, stainless steel or aluminium. Manufactured with an insulated device on motor shaft (cooling wheel) Diameter of wheel / impeller : 225 to 500mm Flow : 1000 to 20000m3/h Pressure : de 0 à 200mmWG Temperature : 80°C maximum in standard version, 100°C with high temperature seal.
250°C in high temperature, Others on request.
CENTRIFUGAL FAN Type : VP SOC Industrial ventilation - Tertiary ventilation Centrifugal single inlet fan fitted with an high efficiency wheel, with forward curved and setted blades type TURA, and a belt driven motor (one bearing out of airflow). The casing is welded by points, out of galvanized steel, stainless steel or aluminium. Diameter of wheel / impeller : 180 to 1000mm Flow : 0 to 80000m3/h Pressure : de 0 à 200mmWG Temperature : 40°C maximum in standard version, 100°C with high temperature grease bearing.
CENTRIFUGAL FAN Type : VP SOC VAC and VP SOC VAC HT Smokes and hot gas exhausters - Industrial ventilation Centrifugal single inlet fan fitted with an high efficiency wheel, with forward curved and setted blades type TURA, and a belt driven motor, bearings outside airflow mounted on pedestal, motor on stool or baseframe. The casing is welded by points, out of galvanized steel, stainless steel or aluminium. Diameter of wheel / impeller : 180 to 1000mm Flow : 0 to 80000m3/h Pressure : de 0 à 200mmWG Temperature : 800°C maximum
CENTRIFUGAL FAN Type : VP SOC VAC and VP SOC VAC HT CALORIFUGE Smokes and hot gas exhausters - Industrial ventilation Centrifugal single inlet fan fitted with an high efficiency wheel, with forward curved and setted blades type TURA, and a belt driven motor, bearings outside airflow mounted on pedestal, motor on stool or baseframe. The casing is welded by points, out of galvanized steel, stainless steel or aluminium. Diameter of wheel / impeller : 180 to 1000mm Flow : 0 to 80000m3/h Pressure : de 0 à 200mmWG Temperature : 800°C maximum
CENTRIFUGAL FAN Type : VP DOC Industrial ventilation - Tertiary ventilation Centrifugal double inlet fan fitted with an high efficiency wheel, with forward curved and setted blades type TURA, belt driven (a bearing out of the airflow). The casing is welded by points, out of galvanized steel, stainless steel or aluminium.
Bearings on rubber ring or with sole. Diameter of wheel / impeller : 180 to 1000mm Flow : 0 to 140000m3/h Pressure : de 0 à 200mmWG Temperature : 40°C maximum in standard version.
CENTRIFUGAL FAN Type : VP DOC-DUPLEX Industrial ventilation Centrifugal double inlet fan fitted with a forward curved and setted blades wheel type TURA, belt driven, bearing with sole out of the airflow). The casing is welded by points, out of galvanized steel, stainless steel or aluminium.
Simplex, duplex, triplex version … Diameter of wheel / impeller : 180 to 1000mm Flow : 0 to 140000m3/h Pressure : de 0 à 200mmWG Temperature : 40°C maximum in standard version.
CENTRIFUGAL FAN Type: VAP SOD TURA / VAP SOD TUST / VAP SOD TUST T17 Explosive atmospheres - Industrial ventilation Centrifugal middle pressure single inlet fan, direct driven, forward curved and setted blades wheel type TURA, or right blades wheel type TUST (heavy air), out of galvanized steel, stainless steel or aluminium, casing welded by points, with outlet flange.
The motor is mounted on a base-plate according to size. Diameter of wheel / impeller : 160 to 400mm Flow : 0 to 1500m3/h Pressure : de 0 à 300mmWG Temperature : 80°C maximum in standard version, 100°C with high temperature seal.
CENTRIFUGAL FAN Type : VAP SOD HT TURA / VAP SOD HT TUST / VAP SOD HT TUST T17 Explosive atmospheres - Smokes and hot gas exhausters - Industrial ventilation Centrifugal middle pressure single inlet fan, direct driven, forward curved and setted blades wheel type TURA, or right blades wheel type TUST (heavy air), out of galvanized steel, stainless steel or aluminium, casing welded by points, with outlet flange.
The motor is mounted on a base-plate according to size.
Manufactured with an insulated device on motor shaft (cooling wheel) Diameter of wheel / impeller : 160 to 400mm Flow : 0 to 1500m3/h Pressure : de 0 à 300mmWG Temperature : 250°C maximum in standard version, Others on request.
CENTRIFUGAL FAN Type : V SOD HP Industrial ventilation Centrifugal high pressure single inlet fan, steel pressed casing and radial vanes wheel out of painted steel, direct driven motor on pedestal, inlet grille, outlet flange. Diameter of wheel / impeller : 480 to 760mm Flow : 0 to 4000m3/h Pressure : de 300 à 1250mmWG Temperature : -10°C to +60°C, (100°C with reinforcement of the wheel).
CENTRIFUGAL FAN Type : VARS Smokes and hot gas exhausters - Industrial ventilation Centrifugal middle pressure single inlet fan, steel pressed heavy casing and wheel with 12 backward curved blades out of painted steel, direct driven. Motor-base according type. Inlet and outlet flanges. Diameter of wheel / impeller : 400 to 800mm Flow : 0 to 20000m3/h Pressure : de 100 à 1000mmWG Temperature : 80°C maximum in standard range, 100°C with high temperature seal.
300°C maximum with cooling wheel.
CENTRIFUGAL FAN Type : VHRS Smokes and hot gas exhausters - Industrial ventilation Centrifugal high pressure single inlet fan, steel pressed heavy casing and wheel with 12 backward curved blades out of painted steel, direct driven. Motor base according type. Inlet and outlet flanges. Diameter of wheel / impeller : 400 to 800mm Flow : 0 to 6000m3/h Pressure : de 200 à 1200mmWG Temperature : 80°C maximum in standard range, 100°C with high temperature seal.
300°C maximum with cooling wheel.
CENTRIFUGAL FAN Type: VHS Smokes and hot gas exhausters - Industrial ventilation Centrifugal high pressure single inlet fan, steel pressed heavy casing, wheel with 16 radial blades out of painted steel, direct driven. Motor base according type. Inlet and outlet flanges. Diameter of wheel / impeller : 400 to 800mm Flow : 0 to 6000m3/h Pressure : de 200 à 1200mmWG Temperature : 80°C maximum in standard range, 100°C with high temperature seal.
300°C maximum with cooling wheel.
CENTRIFUGAL FAN Type: CTV Industrial ventilation - Tertiary ventilation Centrifugal fan incorporated out of duct, blowing inlet and outlet out of line, forward curved and pressed blades wheel type TUE, direct driven, motor outside the airflow with connection flange, out of galvanized steel, stainless steel, aluminium. Diameter of wheel / impeller : 120 to 500mm Flow : 0 to 10000m3/h Pressure : de 0 à 120mmWG Temperature : 80°C maximum in standard range, 100°C with high temperature seal.
CENTRIFUGAL FAN Type : CTV HT Smokes and hot gas exhausters - Industrial ventilation Centrifugal fan incorporated out of duct, blowing inlet and outlet out of line, forward curved and pressed blades wheel type TUE, direct driven, motor outside the airflow, with connecting flange, out of galvanized steel, stainless steel, aluminium.
Manufactured with an insulated device on motor shaft (cooling wheel) Diameter of wheel / impeller : 120 to 500mm Flow : 0 to 10000m3/h Pressure : de 0 à 120mmWG Temperature : 250°C maximum in standard range, Others on request.
CENTRIFUGAL FAN Type: CTVP Industrial ventilation - Tertiary ventilation Centrifugal fan incorporated out of duct, blowing inlet and outlet out of line, with an high efficiency wheel with forward curved and setted blades type TURA, direct driven, motor outside the airflow, with connecting flange, out of galvanized steel, stainless steel, aluminium. Diameter of wheel / impeller : 180 to 630mm Flow : 0 to 15000m3/h Pressure : de 0 à 120mmWG Temperature : 80°C maximum in standard range, 100°C with high temperature seal.
CENTRIFUGAL FAN Type: CTVP HT Smokes and hot gas exhausters - Industrial ventilation Centrifugal fan incorporated out of duct, blowing inlet and outlet out of line, with an high efficiency wheel with forward curved and setted blades type TURA, direct driven, motor outside the airflow, with connecting flange, out of galvanized steel, stainless steel, aluminium.
Manufactured with an insulated device on motor shaft (cooling wheel) Diameter of wheel / impeller : 180 to 630mm Flow : 0 to 15000m3/h Pressure : de 0 à 120mmWG Temperature : 250°C maximum in standard range, Others on request.
CENTRIFUGAL FAN Type N Explosive atmospheres - Industrial ventilation - Tertiary ventilation Centrifugal single inlet fan with a forward curved and setted blades wheel, direct driven motor, wheel and casing out of polypropylene.
Polypropylene is food and recyclable. Diameter of wheel / impeller : 150 to 350mm Flow : 0 to 8000m3/h Pressure : de 0 à 150mmWG Temperature : 60°C Maximum.
CENTRIFUGAL FAN Type STORM Explosive atmospheres - Industrial ventilation - Tertiary ventilation Centrifugal single inlet fan with a forward curved and setted blades wheel, direct driven motor, wheel and casing out of polypropylene.
Polypropylene is food and recyclable. Diameter of wheel / impeller : 100 to 160mm Flow : 0 to 1500m3/h Pressure : de 0 à 200mmWG Temperature : 60°C Maximum.
CENTRIFUGAL FAN Type VPR SOD Industrial ventilation - Tertiary ventilation Single inlet centrifugal fan with a backward curved impeller out of Epoxy painting steel, direct driven, casing out of galvanized steel. Diameter of wheel / impeller : 250 to 1000mm Flow : 0 to 40000m3/h Pressure : de 0 à 150mmWG Temperature : 80°C maximum in standard range, 100°C with high temperature seal.
300°C maximum with cooling wheel.
CENTRIFUGAL FAN Type VPR SOC Horizontal low blowing 270°, horizontal High blowing 90°, vertical High blowing 0°C Industrial ventilation - Tertiary ventilation Single inlet centrifugal fan with a backward curved impeller out of Epoxy painting steel, belt driven, bearings out of airflow, mounted on base, motor on base, casing out of galvanized steel. Diameter of wheel / impeller : 250 to 1000mm Flow : 0 to 40000m3/h Pressure : de 0 à 150mmWG Temperature : 80°C maximum in standard range, 100°C with high temperature seal.
300°C maximum with cooling wheel.
CENTRIFUGAL FAN Type AXC Tertiary ventilation Centrifugal fan incorporated out of duct, blowing inlet and outlet out of line, with a wheel with backward curved and setted blades type TURR, direct driven, motor out of the airflow, external rotor, with connecting flange, out of galvanized steel and synthetic impeller.
Regulation possible from 0 to 100%. Diameter of wheel / impeller : 100 to 355mm Flow : 0 to 2400m3/h Pressure : de 0 à 75mmWG Temperature : 60°C maximum.
HOT GAS CIRCULATION FAN Type BE-V SOD DIRECT DRIVE Hot gas circulation fans - Industrial ventilation Centrifugal hot gas circulation fan forward curved wheel, direct.
Working with or without casing. (Curves with casing)
Manufactured out of galvanized steel, stainless steel, aluminium, with or without insulating box.
- BE1-SOD: Temperature up to 100 ° C
- BE2-SOD: maximum temperature 250 ° C
- BE3-SOD: maximum temperature 800 ° C
with or without insulating box. Diameter of wheel / impeller : 120 to 500mm Flow : 0 to 13000m3/h Pressure : de 0 à 150mmWG Temperature : - 60 to + 800°C maximum.
HOT GAS CIRCULATION FAN Type BE-VP DIRECT DRIVE Explosive atmospheres - Hot gas circulation fans - Industrial ventilation Centrifugal hot gas circulation fan forward curved wheel, direct or belt driven.
Working with or without casing.
Manufactured out of galvanized steel, stainless steel, aluminium, with or without insulating box.
- BE1-SOD: Temperature up to 100 ° C
- BE2-SOD: maximum temperature 250 ° C
- BE3-SOD: maximum temperature 800 ° C
with or without insulating box. Diameter of wheel / impeller : 133 to 560mm Flow : 0 to 25000m3/h Pressure : de 0 à 200mmWG Temperature : - 60 to + 800°C maximum.
HOT GAS CIRCULATION FAN Type BE-VP DRIVEN PULLEY BELT Hot gas circulation fans - Industrial ventilation Centrifugal hot gas circulation fan forward curved wheel, direct or belt driven.
Working with or without casing.
Manufactured out of galvanized steel, stainless steel, aluminium, with or without insulating box.
- BE1-SOC: Temperature maximum 150 ° C
- BE2-SOC: maximum temperature 300 ° C
- BE3-SOC: maximum temperature 1050 ° C
with or without insulating box. Diameter of wheel / impeller : 250 to 1000mm Flow : 0 to 80000m3/h Pressure : de 0 à 200mmWG Temperature : - 60 to 1050°C maximum.
HOT GAS CIRCULATION FAN Type BE-TURR DIRECT DRIVE Explosive atmospheres - Hot gas circulation fans - Industrial ventilation Centrifugal hot gas circulation fan, backward curved and radial wheel, direct or belt driven.
Working without casing.
Manufactured out of galvanized steel, stainless steel, aluminium, with or without insulating box.
- BE1-SOD: Temperature up to 100 ° C
- BE2-SOD: maximum temperature 250 ° C
- BE3-SOD: maximum temperature 800 ° C
with or without insulating box. Diameter of wheel / impeller : 400 to 1400mm Flow : 0 to 140000m3/h Pressure : de 0 à 200mmWG Temperature : - 60 to + 800°C maximum.
HOT GAS CIRCULATION FAN Type BE-TURR DRIVEN PULLEY BELT Hot gas circulation fans - Industrial ventilation Centrifugal hot gas circulation fan, backward curved and radial wheel, direct or belt driven.
Working without casing.
Manufactured out of galvanized steel, stainless steel, aluminium, with or without insulating box.
- BE1-SOC: Temperature maximum 150 ° C
- BE2-SOC: maximum temperature 300 ° C
- BE3-SOC: maximum temperature 1050 ° C
with or without insulating box. Diameter of wheel / impeller : 400 to 1400mm Flow : 0 to 140000m3/h Pressure : de 0 à 200mmWG Temperature : - 60 to 1050°C maximum.
HOT GAS CIRCULATION FAN Type BE-TURR BSZ DIRECT DRIVE Explosive atmospheres - Hot gas circulation fans - Industrial ventilation Centrifugal hot gas circulation fan, backward curved and radial wheel, direct or belt driven.
Working without casing.
Manufactured out of galvanized steel, stainless steel, aluminium, with or without insulating box.
- BE1-SOD: Temperature up to 100 ° C
- BE2-SOD: maximum temperature 250 ° C
- BE3-SOD: maximum temperature 800 ° C
with or without insulating box. Diameter of wheel / impeller : 250 to 1000mm Flow : 0 to 60000m3/h Pressure : de 0 à 200mmWG Temperature : - 60 to + 800°C maximum.
HOT GAS CIRCULATION FAN Type BE-TURR BSZ DRIVEN PULLEY BELT Hot gas circulation fans - Industrial ventilation Centrifugal hot gas circulation fan, backward curved and radial wheel, direct or belt driven.
Working without casing.
Manufactured out of galvanized steel, stainless steel, aluminium, with or without insulating box.
- BE1-SOC: Temperature maximum 150 ° C
- BE2-SOC: maximum temperature 300 ° C
- BE3-SOC: maximum temperature 1050 ° C
with or without insulating box. Diameter of wheel / impeller : 250 to 1000mm Flow : 0 to 60000m3/h Pressure : de 0 à 200mmWG Temperature : - 60 to 1050°C maximum.
Extraction turret Type TE-V Explosive atmospheres - Industrial ventilation - Tertiary ventilation Extraction turret, (Galvanized or steel construction). Diameter of wheel / impeller : 120 to 500mm Flow : 0 to 13000m3/h Pressure : de 0 à 150mmWG Temperature : 80°C maximum in standard range, 100°C with a high temperature seal.
Extraction turret Type EFT-V Smokes and hot gas exhausters - Industrial ventilation - Tertiary ventilation Extraction turret, (Galvanized or steel construction).
Manufactured with an insulated device on motor shaft (cooling wheel) Diameter of wheel / impeller : 120 to 500mm Flow : 0 to 13000m3/h Pressure : de 0 à 150mmWG Temperature : 250°C maximum in standard version, Others on request.
Extraction turret Type TE-VP Explosive atmospheres - Industrial ventilation - Tertiary ventilation Extraction turret, (Galvanized or steel construction). Diameter of wheel / impeller : 180 to 500mm Flow : 0 to 20000m3/h Pressure : de 0 à 200mmWG Temperature : 80°C maximum in standard range, 100°C with a high temperature seal.
Extraction turret Type EFT-VP Smokes and hot gas exhausters - Industrial ventilation - Tertiary ventilation Extraction turret, (Galvanized or steel construction).
Manufactured with an insulated device on motor shaft (cooling wheel) Diameter of wheel / impeller : 180 to 500mm Flow : 0 to 20000m3/h Pressure : de 0 à 200mmWG Temperature : 250°C maximum in standard version, Others on request.
Extraction turret Type TE-N Explosive atmospheres - Industrial ventilation - Tertiary ventilation Extraction turret, polypropylene construction Diameter of wheel / impeller : 150 to 350mm Flow : 0 to 8000m3/h Pressure : de 0 à 150mmWG Temperature : 60°C maximum
Extraction turret Type EMMOS Fire exhaustion - Industrial ventilation - Tertiary ventilation Extraction turret, (Galvanized).(Agreement F400 120) Diameter of wheel / impeller : 280 to 800mm Flow : 300 to 20000m3/h Pressure : de 0 à 75mmWG Temperature : 60°C maximum (Agreement F400 120)
SMOKE EXHAUSTER Type ATC Smokes and hot gas exhausters - Industrial ventilation - Tertiary ventilation Draught accelerator, centrifugal forward curved and pressed blades wheel TUE or special; tube housing, inlet and outlet in line, steel or stainless steel.
The accelerators AIRAP are designed to be incorporated by nesting in a duct with a diameter of 153, 180, 200, 250 mm.
The range of AIRAP accelerators can fit heaters with a capacity of 5 000 to 350 000 kcal / h, providing a rate of 40 to 1 000 m3 / h, up to a temperature of 250 degrees C.
The accelerator is provided either by drawing mixed (natural and mechanical drawing combined), version 1, or entirely mechanical (establishment of a screen printing obturant natural), version 2 .
Particularly silent (53 dBA noise level or 65 dBA) and easy installation, the accelerator ATC can also be used for ventilation of rooms such as kitchens, bathrooms, etc.
Under construction standard, the device is made of sheet steel protected by a high temperature aluminum paint. Upon request, it can be delivered in stainless steel or receive special protection (Rilsan, Epoxy ...).
To regulate the circulation, provide a moderator placed upstream of the accelerator. Diameter of wheel / impeller : 153 to 250mm Flow : 40 to 1300m3/h Pressure : de 0 à 100mmWG Temperature : 250°C maxi (300°C on request).
SMOKE EXHAUSTER Type EF Smokes and hot gas exhausters - Industrial ventilation - Tertiary ventilation Draught accelerator, centrifugal forward curved and pressed blades wheel TUE or special; tube housing, inlet and outlet in line, steel or stainless steel.
The accelerators AIRAP are designed to be incorporated by nesting in a duct with a diameter of 153, 180, 200, 250 mm.
The range of AIRAP accelerators can fit heaters with a capacity of 5 000 to 350 000 kcal / h, providing a rate of 40 to 1 000 m3 / h, up to a temperature of 250 degrees C.
The accelerator is provided either by drawing mixed (natural and mechanical drawing combined), version 1, or entirely mechanical (establishment of a screen printing obturant natural), version 2 .
Particularly silent (53 dBA noise level or 65 dBA) and easy installation, the accelerator ATC can also be used for ventilation of rooms such as kitchens, bathrooms, etc.
Under construction standard, the device is made of sheet steel protected by a high temperature aluminum paint. Upon request, it can be delivered in stainless steel or receive special protection (Rilsan, Epoxy ...).
To regulate the circulation, provide a moderator placed upstream of the accelerator. Diameter of wheel / impeller : 120 to 450mm Flow : 50 to 10000m3/h Pressure : de 0 à 125mmWG Temperature : 250°C maxi (300°C on request).
SMOKE EXHAUSTER Type EFC Smokes and hot gas exhausters - Tertiary ventilation Smokes centrifugal exhauster, thick continuous welded housing with an inline inlet-outlet air flow, direct driven forward curved blades wheel buy a speed adjustable motor.
Its installation is usually a peak directly in parallel on the conduit.
The construction of this device allowing the natural draft, it can be stopped once past the important smoke initially, or when the temperature of the duct is sufficient.
The smoke extractor EFC is produced in large welded sheet metal, protected by a painting aluminum high temperature. Diameter of wheel / impeller : 133 to 275mm Flow : 300 to 1800m3/h Pressure : de 0 à 20mmWG Temperature : 250°C maxi (300°C on request).
VENTILATION CABINETS Type CNT Tertiary ventilation Ventilation cabinet insulated by an high density foam 10 mm thick, manufactured with panels out of galvanized steel. One panel opens on the double inlet fan with a forward curved impeller, insulated by anti-vibration mountings and outlet supple sleeve. The fan is coupled to the electrical motor by a trapeze belt. Diameter of wheel / impeller : 0 to 0mm Flow : 0 to 45000m3/h Pressure : de 0 à 100mmWG Temperature : 40° C clean air
VENTILATION CABINETS Type EUROPE Tertiary ventilation Ventilation cabinet with access panel manufactured in galvanized steel, made of a double inlet fan with a forward curved impeller out of galvanized steel, insulated by anti-vibration mountings and supple sleeve and coupled to the electrical motor by a trapeze belt. Diameter of wheel / impeller : 0 to 0mm Flow : 0 to 20000m3/h Pressure : de 0 à 100mmWG Temperature : 40° C clean air
Ventilation cabinet Type PALLAS 400°/2H - Refoulement Horizontal et vertical Fire exhaustion - Tertiary ventilation Ventilation cabinet manufactured out of galvanized steel made of a double inlet fan with a forward curved impeller out of galvanized steel, insulated by anti-vibration mountings and supple sleeve and coupled to the electrical motor by a trapeze belt. Diameter of wheel / impeller : 225 to 710mm Flow : 0 to 70000m3/h Pressure : de 0 à 200mmWG Temperature : 40°C clean air
400°C/2h
WHEEL Type TUE Industrial ventilation - Tertiary ventilation Double or single flow wheels, with forward curved and pressed and setted blades, 14 widths, more than 200 diameters, out of galvanized and stainless steel or aluminium, low and middle pressure, 65% maximum efficiency with casing. Diameter of wheel / impeller : 96 to 500mm Flow : 0 to 13000m3/h Pressure : de 0 à 150mmWG Temperature : - 60 à + 550°C maximum
WHEEL Type TURA Industrial ventilation - Tertiary ventilation Forward, curved and setted blades, single and double flow wheels, out of galvanized and stainless steel or aluminium, low and middle pressure, 73% maximum efficiency with casing, diameters and widths, mm by mm. Diameter of wheel / impeller : 97 to 1000mm Flow : 0 to 80000m3/h Pressure : de 0 à 200mmWG Temperature : - 60 to 1050°C maximum
WHEEL Type TURR Industrial ventilation - Tertiary ventilation Wheel with backward curved and welded blades, single and double flow, out of galvanized or stainless steel or aluminium, low and middle pressure, 85% maximum efficiency with casing. Diameter of wheel / impeller : 250 to 1400mm Flow : 0 to 140000m3/h Pressure : de 0 à 200mmWG Temperature : - 60 to 1050°C maximum.
WHEEL TYPE TURR-BSZ Industrial ventilation - Tertiary ventilation Wheel with backward curved and welded blades, single and double flow, out of galvanized or stainless steel or aluminium, low and middle pressure, 85% maximum efficiency with ca Diameter of wheel / impeller : 280 to 1000mm Flow : 0 to 50000m3/h Pressure : de 0 à 200mmWG Temperature : - 60 to 1050°C maximum.
SPECIAL WHEEL Industrial ventilation - Tertiary ventilation Wheel with forward or backward curved and welded, radial and special blades, single or double flow, out of steel, stainless steel, aluminium, low, medium and high pressure, AIRAP manufacturing or on customers drawings. Diameter of wheel / impeller : 97 to 1000mm Flow : 0 to 80000m3/h Pressure : de 0 à 200mmWG Temperature : - 60 to 1050°C maximum.
Extraction turret Type JET Explosive atmospheres - Industrial ventilation - Tertiary ventilation Extraction turret with vertical air flow, polypropylene construction Diameter of wheel / impeller : 200 to 300mm Flow : 0 to 3500m3/h Pressure : de 0 à 150mmWG Temperature : 60°C maximum
